Xiamen Hengfuda Electronic Technology Co., Ltd.

Language

中文 English

News

Company Dynamics

Industry dynamics

LED display heating temperature is too high what damage

Nov 22,2023

Xiamen LED display is an advertising display device with audio and video functions. LED display is gradually replacing canvas advertising and light box advertising with good advertising effects. LED display is very popular because of the vivid picture, then you know what damage LED display heating temperature is too high? This will lead to color correction failure, LED at low temperature and high temperature, the wavelength drift is relatively large. 2. Output brightness reduction: According to understanding, every temperature change in degrees Celsius leads to a 1% change in output brightness. It is worth mentioning that the red light is significantly affected, and its brightness will be reduced by nearly 2/3. Relatively speaking, the temperature influence of blue light and green light brightness is not so strong. When the temperature rises, the brightness emitted by LEDs of different colors is different. 3, leading to shortened LED life: According to a laboratory data in a country, the junction temperature increased from 63C to 74C, and the LED life was reduced from 36000 hours to 16000 hours. 4, the system cost: too many heat dissipation components are damaged, once broken must be reconfigured, thus increasing the system cost. Increase the cost of use: because of the excessive consumption of energy, the cost of use will rise. Xiamen LED display has a wide range of applications, will appear in shopping malls and central areas, in the subway, high-speed rail and underground parking lot we can see its figure, in these occasions the use of LED display can fully attract the attention of the audience in a small space to achieve a good communication effect.

The news headline here is whether the brighter the LED display, the better!

Oct 24,2023

Is the brightness of the LED display getting better and better? Xiaobian here can clearly tell you that this is not the case. I think people in the industry should know that LED display is mainly composed of diodes. Because of its energy saving and high brightness, LED products are very popular in the display industry. When many LED display manufacturers introduce to customers, most of them will say that the higher the brightness, the better the quality. Is that really the case? The little editor takes you to uncover the truth.

The difference between three-in-one and three-in-one full-color LED display

May 25,2024

There are too many types of led displays. If you don't know much about led displays, you really don't have the concept of three-in-one, three-in-one full-color LED displays in your head. Let's first look at the explanation of three-in-one and three-in-one: 1. What is a three-in-one surface sticker It refers to the combination of red, green and blue three light-emitting points packaged in the same light-emitting tube. Since they are packaged in the same light-emitting tube, they are one point in close proximity and one line is separated. The price of the three-in-one is high, and the best ones are Riya, Osram and CREE. 2. What is a three-and-one table post (separate table post) It means that the three light-emitting points of red, green and blue are packaged separately, and after packaging, they are arranged into a pixel point like those of the sub-surface patch. Then we look at the difference between three-in-one and three-in-one full-color LED display: Compared with three and one, 1. three-in-one has low power consumption, good heat dissipation, effectively prolonging the life of the screen, and high reliability. Because three and one are separate surface stickers, three separate power supply 2., the three-in-one maintenance cost is lower than that of the three-in-one, because the three-in-one can realize the maintenance of a single lamp. 3., the three-in-one has better color uniformity and no granular feeling, because the three-in-one surface can be treated with diffuse reflection light. In addition, the viewing angle of the whole screen is larger than that of the three-in-one. 4. usually, the three-in-one full-color screen is easier than the three-in-one full-color screen, and the color saturation is high. 5. in general, the three and one packaging costs and production costs are much lower than the three-in-one. 6., the three-in-one full-color screen is more uniform in overall color than the three-in-one, because the three-in-one uses the whole surface to emit light, while the three-in-one is only limited to point light. 7., the temperature of the three-in-one IC and the driver chip is lower than that of the three-in-one, thus improving the overall life of the screen body. 8., from the welding process, the packaging method of the three-in-one surface mount is very mature, which is better than the three-in-one surface mount. 9., due to the complex steps in the three-in-one surface mounting process, the construction period is longer. The construction period of three and one is the production date of normal production display screen. 10. are usually three and one with a mask protection, which can achieve dust prevention, sun protection, and can achieve the effect of protecting the light-emitting chip, while the three-in-one is that the light-emitting chip is directly exposed without any mask protection. Due to the high price of the three-in-one table sticker, it is mainly used for export. It is believed that with the gradual reduction of the cost of chip processing, the three and one will meet the needs of users well with its extremely high cost performance, while the Asian surface stickers will withdraw from the market in the near future. Interested with the network partners please contact "LED big screen network. Without the written authorization of "LED large screen network", please do not reprint or create a mirror image, otherwise it is infringement.

LED display four introductory knowledge

May 25,2024

1. LED concepts and types LEDs, or light-emitting diodes, are tiny electronic semiconductors that convert electrical energy into visible light. The types of chemicals used in LEDs determine their color, brightness and power. The LED lamp has no filament, and the filament of the incandescent lamp will not burn or damage. LEDs are available in two different forms, surface-mounted and in-line packaging. Surface stickers refer to the way the LED lead frame is installed. The LED lamp bead is mounted on a surface of the circuit board. The SMD contains red, green and blue chips. The in-line LED is connected to the circuit board through the lead, and the position is higher. Each LED lamp bead is a red, green and blue monochrome lamp bead.

The most complete knowledge of weak current engineering LED display, look at this article is enough!

May 25,2024

LED display is widely used in the whole weak current industry. As long as there is a display, LED display is basically needed. Let's learn today. 01 Text Classification of 1. LED display (1) According to the use environment: ① Indoor (low density, low brightness, non-waterproof) ② Outdoor (high brightness, waterproof) ③ Semi-outdoor (2) According to the color of the display: ① Monochrome (generally single red) Two-color (usually red and green) ③ Full color (3) Points by point spacing P1.2, P1.5, P1.8, P1.9, P2, P2.5, P3, P4, P5, P6, P7.62, P8, P10, P12, P12.5, P14, P16, P18, P20, P22, P25, P31.25, P37.5, P40, P60, P100

LED display board

May 25,2024

LED screen is a new type of imaging electronic equipment made of light-emitting diodes arranged in sequence. Because of its high brightness, wide viewing angle and long life, it is widely used in outdoor advertising screens and other products. The use of LED light sources for lighting, first replace the power-consuming incandescent lamps, and then gradually enter the entire lighting market, will save a lot of electricity. Recently, the white LED has reached a single power consumption of more than 1 watt, light output 25 lumens, also increased its practicality.

< 1 2 >

Hengfuda looks forward to in-depth cooperation with domestic and foreign customers to jointly promote the research and development, production, sales and service of professional LED display carrier products, continue to select high-quality materials, win the trust of customers with excellent quality and sincere service, and seek sustainable development!

Column Menu

Product display

Backlit display board

Mini-LED carrier board

Telephone: +8618859528767

E-mail:hengfuda@163.com

Xiamen Headquarters: No. 101 Huliyuan, Tongan Industrial Concentration Zone, Xiamen

Website:http://www.hfdxmpcb.com

Official WeChat

Business License

SEO